OVERLOADING STORAGE BUNKER OF THE «POWERBANK» SERIES ALLOWS OPTIMIZATION
OF AGRICULTURAL CROPS COLLECTION PROCESS

ADVANTAGES OF «POWERBANK» STORAGE BUNKER:
During harvesting, the «POWERBANK-30» hopper is used to receive grain from combines (for example, just in the field), allows its transportation to cars, and during sowing, it quickly loads the planters, seeds, and fertilizers.
The useful volume of the bunker is 31 m³. The weight of the cargo is 26 tons. The productivity of the screws is 12.3 m³/min.
- Increasing the productivity of the harvester, thanks to its continuous operation and simultaneous unloading of grain;
- Reduction of downtime of planters during loading, which leads to increased productivity of planters per shift;
- Weighing grain in the field with the possibility of issuing a check or transferring data via GPS to the operator’s computer.
- Hydraulic system of expansion of the auger
- Hydraulic control system of belt drive of screws
- Gearbox and cardan shaft Bondioli & Pavesi (Italy)
- Reliable chassis with an extended trouble-free cycle
- Pneumatic single-circuit braking system
- Wheels with a wide selection of tires: basic 550/60-22.5, optional 650/50-22.5 or 650/50-26.5

TECHNICAL SPECIFICATIONS «POWERBANK-30»
- Useful volume of the bunker, m³: 31
- The maximum mass of transported bulk material (grain), kg: 26,000
- Required power of the tractor, hp: 180-220
- Own weight, kg: 7,480
- Hopper length, mm: 7,500
- Hopper height, mm: 3,400
- Hopper width, mm: 3,000
- Loading height, mm: 4,200
- Height of the traction loop (adjustable), mm: 450-550
- Bearing load on the traction loop, kg: 2,000
- Productivity of screws, m³/min: 12.3
- A weighing system with a thermal printer: optional
- Suspension type: tandem
- Wheels with tires standard size: basic 550/60-22.5, optional 650/50-22.5 or 650/50-26.5
- Tire pressure: 2.8
- Pressure on the field surface kg/cm²: 0.74
- The awning system: optional
- Hatches for quick unloading (at the bottom): 2
- Braking system: pneumatic single circuit
- Gearbox and cardan shaft Bondioli & Pavesi (Italy)